Loading... Please wait... 
Store Categories
Store Categories
Brands
Brands
- Home
- Computers/Tablets & Networking
- Apacer APS25M5A008G-ACM SAFD25M4-M 8Gb Embedded MLC SATA Solid State Drive C-1
Apacer APS25M5A008G-ACM SAFD25M4-M 8Gb Embedded MLC SATA Solid State Drive C-1
$16.53
)
Product Description
This listing is for 1 NEW Apacer APS25M5A008G-ACM SAFD25M4-M 8Gb Embedded MLC SATA Solid State Drive. Will warranty for 30 DAYS!
APS25M5A008G-ACM
The 8GB Apacer SAFD25M4-M Series Embedded SATA Solid State Drive - APS25M5A008G-ACM - is based on MLC Type NAND flash and 5V input; performed Sustained Read 115 MB/sec Sustained Write 26 MB/sec. Apacer SAFD25M4-M is a solid-state disk (SSD) drive that contains a controller, embedded firmware, and flash media along with a male connector. Using NAND flash memory devices, the SAFD drive interfaces with the host allowing data to be seamlessly transferred between the host and the flash devices.
SAFD25M4-M drive is designed with a single-chip controller, offering capacities of up to 128 gigabytes and providing full support for the SATA II high-speed interface standard. It can operate at sustained access rates of up to 100 megabytes per second, which is much faster than any other solid-state or traditional SATA drive currently available on the market. Though built with MLC, this SSD can work in a highly demanding environment as it can withstand ambient temperature from -40°C to +85°C (for certain capacities only).
In addition to buffer management through dynamical allocation, SAFD25M4-M adopts the Apacer-specific global wear-leveling scheme to allow uniform use of all storage blocks, ensuring that the lifetime of a flash media can be significantly increased and the disk performance is optimized as well. SAFD25M4-M provides the S.M.A.R.T. feature that follows the SATA Rev. 2.6, ATA/ATAPI-7 specifications and uses the standard SMART command B0h to read data from the drive. This feature protects the user from unscheduled downtime by monitoring and storing critical drive performance.
Standard ATA / IDE bus interface
Serial ATA 2.6 (Gen.2)
SATA II, 3.0Gbps
ATA-compatible command set
Connector type (7+15) pin male SATA 3Gb/s connector
Performance Sustained read: Up to 115MB / sec
Sustained write: Up to 26MB / sec
Capacity 8GB
NAND Flash Type MLC (Multiple-Level Cell)
Temperature Ranges Operation: 0°C to 70°C
Storage: -40°C to 100°C
Flash Management
Advanced Wear-Leveling algorithms
S.M.A.R.T. technology
Built-in hardware ECC
Intelligent power failure recovery
Trim
Specifications are subject to change without notice
APS25M5A008G-ACM
The 8GB Apacer SAFD25M4-M Series Embedded SATA Solid State Drive - APS25M5A008G-ACM - is based on MLC Type NAND flash and 5V input; performed Sustained Read 115 MB/sec Sustained Write 26 MB/sec. Apacer SAFD25M4-M is a solid-state disk (SSD) drive that contains a controller, embedded firmware, and flash media along with a male connector. Using NAND flash memory devices, the SAFD drive interfaces with the host allowing data to be seamlessly transferred between the host and the flash devices.
SAFD25M4-M drive is designed with a single-chip controller, offering capacities of up to 128 gigabytes and providing full support for the SATA II high-speed interface standard. It can operate at sustained access rates of up to 100 megabytes per second, which is much faster than any other solid-state or traditional SATA drive currently available on the market. Though built with MLC, this SSD can work in a highly demanding environment as it can withstand ambient temperature from -40°C to +85°C (for certain capacities only).
In addition to buffer management through dynamical allocation, SAFD25M4-M adopts the Apacer-specific global wear-leveling scheme to allow uniform use of all storage blocks, ensuring that the lifetime of a flash media can be significantly increased and the disk performance is optimized as well. SAFD25M4-M provides the S.M.A.R.T. feature that follows the SATA Rev. 2.6, ATA/ATAPI-7 specifications and uses the standard SMART command B0h to read data from the drive. This feature protects the user from unscheduled downtime by monitoring and storing critical drive performance.
Standard ATA / IDE bus interface
Serial ATA 2.6 (Gen.2)
SATA II, 3.0Gbps
ATA-compatible command set
Connector type (7+15) pin male SATA 3Gb/s connector
Performance Sustained read: Up to 115MB / sec
Sustained write: Up to 26MB / sec
Capacity 8GB
NAND Flash Type MLC (Multiple-Level Cell)
Temperature Ranges Operation: 0°C to 70°C
Storage: -40°C to 100°C
Flash Management
Advanced Wear-Leveling algorithms
S.M.A.R.T. technology
Built-in hardware ECC
Intelligent power failure recovery
Trim
Specifications are subject to change without notice
