PE10G2T Dual Port Fiber 10 Gigabit Ethernet TOE PCI Express Server Adapter

Item is in excellent cosmetic condition.
Pulled from a clean working environment.

"Silicom 10 Gigabit TOE PCI Express server adapters are network interface cards that contain multiple / single independent 10 Gigabit Ethernet port/s.
The Silicom 10 Gigabit PCI Express TOE server adapters provide a fully integrated up to Layer 5 solution along with a complete Gigabit Ethernet port/s.
Silicom 10 Gigabit Ethernet PCI Express TOE server adapters are Silicom's forth -generation solution for high performance server network application. Silicom 10 Gigabit Ethernet PCI Express TOE server adapters are based on Broadcom 10 Gigabit Ethenet TOE controller features an industry first support for single chip TOE 10 Gigabit Ethernet NIC with TCP / IP offload Engine, RDMA NIC (RNIC)*, iSCSI 1.0* /iSER HBA*."

Copper CX4 10 Gigabit Ethernet Technical Specifications - (10GBASE-CX4) Adapters:

IEEE Standard / Network topology: Copper 10 Gigabit Ethernet, 10GBase-CX4
Data Transfer Rate: 3.125GBd per one lane, X4 transmit, X4 receive
Cables and Operating distance: (Up to) CX4 Cable: Up to 15m

Operating Systems Support

Operating system support: Windows
Linux
Netware
Unix
Solaris

General Technical Specifications

Interface Standard: PCI-Express Base Specification Revision 1.1
Board Size: Low profile short add-in card: 167.64mm X 68.91mm (6.6"X 2.713")
PCI Express Card Type: X8 Lane
PCI Express Voltage: +3.3V +-9%,
+12V +- 8%
PCI Connector: X8 Lane
Controller: Broadcom: BCM57710
Holder: Metal Bracket Full Height and low profile
Weight: 100 gr (3.527oz)
Power Consumption: 7.08W, 0.59A at 12V and 0.066W, 0.02 at 3.3V: Typical all ports operate at 10Gbit/s.
6.12W, 0.51A at 12V and 0.066W, 0.02 at 3.3V: Typical No link at all ports.
Operating Humidity: 0%-90%, non-condensing
Operating Temperature: 0°C - 50°C (32°F - 122°F)
Storage: -20°C-65°C (-4°F-149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.By 1kHz CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

LEDs

LEDs: (1) LED per port
Link / Act : Turns on link, blinks on activity (green)
LEDs location: LEDs are located on the PCB, visible via holes in the metal bracket holder
Connectors: CX4