PE10G2T-SR Dual Port Fiber 10 Gigabit Ethernet PCI Express Server Adapter

Item is in excellent cosmetic condition.
Pulled from a clean working environment.

General Technical Specifications

Interface Standard: PCI-Express Base Specification Revision 1.1
Board Size: PCI low profile short add in card: 167.64mm x 68.91mm (6.6"X 2.713")
PCI Express Card Type: X8 Lane
PCI Express Voltage: +3.3V +-9%,
+12V +- 8%
PCI Connector: X8 Lane
Controller: Broadcom: BCM57710
Holder: Metal Bracket: Full Height and low profile
Weight: 130gr (4.586 oz)
Power Consumption: PE10G2T-SR:
13.58W 1.86 Aat 3.3Vand 0.62 A at 12V: Typical all ports operate at 10Gb/s.
13.55W 1.85A at 3.3Vand 0.62 at 12V: Typical No link at all ports
11.30W 1.17A at 3.3Vand 0.62 at 12V: Typical No XFPs
Operating Humidity: 0%-90%, non-condensing
Operating Temperature: 0°C - 50°C (32°F - 122°F)
Storage: -20°C-65°C (-4°F-149°F)
EMC Certifications: FCC Part 15, Subpart B Class B
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998 Amendments A1: 2000; A2: 2003
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000, Class A
Harmonic Current Emissions
CE EN 61000 3-3 1995, Amendment A1: 2001
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

LEDs

LEDs: (1) LED per port
Link / Act : Turns on link, blinks on activity (green)
LEDs location: LED is located on the PCB, visible via holes in the metal bracket holder
Connectors: LC